CUI LS Daily Concrete Floor Cleaner with Densifier Gallon

Pay with

CUI LS Daily Concrete Floor Cleaner with Densifier Features

• Polished Concrete Floor Cleaner

• Treated with Lithium silicate densifier

• For Polished Concrete Floors

About CUI LS Daily Concrete Floor Cleaner With Densifier

LS Daily Cleaner is a specially formulated daily cleaner for concrete floors treated with lithium silicate densifier. This formula has been designed to remove common soils found on polished concrete floors. LS Daily Cleaner is formulated with Lithium silicate to help continue the hardening process of any additional calcium hydroxide. Continued use of LS Daily cleaner will keep floors clean and durable. LS Daily Cleaner is only for use on polished concrete floors that do not have a protective coating on them. Prevention: Wear eye protection/face protection. Response: If skin irritation occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue Rinsing. Immediately call a POISON CENTER/doctor/medical professional. For Damp Mopping: Dilute at a dilution rate of 2oz. per gallon with clean water for light traffic areas, 3 ounces per gallon for moderate to heavy traffic areas. Soak and wring mop and apply solution to the stone surface. Do not rinse or re-mop. Re-wet and wring mop often to avoid re- depositing dirt to the surface. Change the solution when it appears dirty. Best results will be achieved when buffed on polished surfaces. Note: Best results are achieved when cotton mops are not used. Rayon blend mops are recommended. On polished surfaces, Coverage: 30,000−40,000 sq. ft. (2,787−3,716 sq. meters) per gallon. For Automatic Scrubbers: Dilute product at the rate of 2 ounces per gallon. Adjust flow rate valve so that the solution wets the surface but does not flood surface. Pass the scrubber over the floor in a manner that does not re-apply the solution onto previously scrubbed areas. Drop but do not lock the vacuum squeegee and turn vacuum on. Use red or white buffing pad. Coverage: 20,000−30,000 sq. ft. (1,858−2,787 sq. meters) per gallon.