3M VHB Double Sided Tape Acrylic Foam Tape, Heavy Duty, Industrial Mounting Waterproof Tape, 16 FT Length, 0.99 Inch Width for LED Strip Lights, Car Decor, Home Decor and Office Décor

Pay with

3M VHB Double Sided Tape Acrylic Foam Tape, Heavy Features

• Fast and easy-to-use permanent bonding method provides high strength and long-term durability. Virtually invisible fastening keeps surfaces smooth.

• Black or white, 0.045 in (1.1 mm), modified acrylic adhesive and very conformable acrylic foam core bonds to a wide variety of substrates including powder coated paints and irregular surfaces.

• Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives. Eliminate drilling, grinding, reɥnishing, screwing, welding and clean-up.

• Creates a permanent seal against water, moisture and more by oɢering better gap ɥlling capabilities. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.

• APPLICATIONS: LED strip lights, photo frames, trims, car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, bathroom pendant, power strip and other automotive home office decorations.

About 3M VHB Double Sided Tape Acrylic Foam Tape, Heavy

Double Sided Tape 5952 is a black or white, 0.045 in (1.1 mm) modified acrylic adhesive with a very conformable, foam core. In most cases, fastening with 5952 Tape is a quicker process than drilling, fastening, or using liquid adhesive. 5952 Tape consists of a durable acrylic adhesive with viscoelastic properties. This provides an extraordinarily strong double sided foam tape that adheres to a broad range of substrates, including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS and painted or sealed wood and concrete. Specifications: ✔ 1 Roll x Black Double Sided Tape. Length 16 feet; Width 0.99 inches; Thickness: 0.045 inches. Application Guide: - Surface Cleaning: Quick pre-clean of tough spots if necessary. Wet cloth to remove most contaminants. Final wipe with dry cloth. - Priming the Surface: Primer on a disposable towel, followed by a dry towel. Dauber bottle followed by a dry towel. Foam brush. - Abrading Your Substrate: Light abrasion by hand. Clean the substrate after abrading to make sure all sanding debris is removed from the bond area. - Tape Application by Hand: Start the tape at the edge of the surface and lay it down, applying constant pressure as you go. Apply a roll down force of at least 15 lbs with a dense J-roller over the entire area to ensure good contact between the tape and the first substrate surface. Remove the protective liner to apply the other substrate. - Applying Final Pressure: Applying pressure to the applied tape facilitates optimal wet-out onto the substrate. Bond strengths at the minimum application temperature will be achieved as follows: 20 minutes 50%, 1 hour 75%, 24 hours 90%, 3 days 100%. Assemblies can be handled within 10 minutes but bonds should not be stressed before 72 hours.