Frequency to Voltage Converter, PLC No String Resistor 5MA Output Current Frequency Voltage Conversion F V Conversion Module, Voltage for Industrial

Pay with

About Frequency To Voltage Converter, PLC No String

Features:1. Convert the 0-200Hz frequency pulse signal into an analog voltage signal of 0-5V.2. Can be used to Convert interface between PLC and frequency, Or movement control card and converter interface matching control occasions.3. Input pulse level is 5V 12V 24V can be directly input, no string resistor. However, the input signal frequency should be maintained for more than 0.5 seconds.4. The output current is 5MA.5. Frequency and voltage conversion module, response time is about 0.3-0.5 seconds.Specification:Condition: 100% Brand NewItem Type: Frequency To Voltage Conversion ModuleModel: FV-200Hz5VFunction: Input 0-200Hz frequency is converted to 0-5VOutput Current: 5MAResponse Time: 0.3-0.5 secondsSize: Approx. 4.5 x 4.7 x 1.7cm / 1.8 x 1.9 x 0.7inPackage List:1 x Frequency To Voltage Conversion ModulePrecautions for use:1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Powered converter. At 24 levels, the power supply needs to be powered by 24VDC3. The signal input is isolated by diaphragm. Guaranteed anti-interference ability.4. For use with PLC, support NPN type. Must have a ground wire.5. If you need to use an encoder, the encoder should be rotated at a constant speed for more than 0.5 seconds.6. Frequency and voltage conversion module, response time is