AUTOOL SDT-206 Automotive EVAP Leak Testing Machine, 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester for Cars/Motorcycles/Boats from US WAREHOURSE

Pay with

About AUTOOL SDT-206 Automotive EVAP Leak Testing

Kindly Note: 1 Avoiding test smoke-sensitive parts with this machine. 2 The machine can work on EVAP system with specific adapter (pressure of machine was larger than EVAP request ). 3 Don't work with the machine continuously more than 8 minutes.Bottom of the machine will give out heat,be careful! 4 Injection paraffin oil or baby oil in machine before detecting (oil is not included in the pack) How to change oil? 1. Inject 20-30ml oil in the machine when use it in the first time. 2. When smoke become weak or go out with steam, it means we should change oil, release residue then injection new oil in machine ( LESS than 15ml ) Ways of Use: 1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. 8. Please repair the leak part timely with specific tool. Package Includes: 1x Main Unit 1x.Hook (with hand-tighten nuts) 1x End cap kits 1x Taper plug 1x Taper pipe 1x Air Sac 1x Oil bottle 1x User manual