All Categories
Type: 6 pieces of gauge set. Accept all input signals. The needle is driven by the principle of moving magnet, which has good durability.
The 6 instrument panels + transmitters include: fuel, voltmeter, oil pressure, temperature, fuel sending unit. The stepping motor is suitable for the whole series of stepping gauges.
Style: stainless steel plate. Operation mode: LCD display, stepping motor. Touch the sensor button to change the setting parameters. Long life, high precision. With curved glass.
Using ultra-wide working voltage design (long-term working voltage: 9-32v, maximum reach: 36v (≤1 minute).
This instrument kit is used to install instruments for vehicles, trucks, motor boats, yachts and other vehicles. Easy to set pulse/revolution.
Specification Application: Car Truck Motorbike Boat Yacht Type: 6 Pieces of Gauge Set Fixed Size: 52mm2-1 / 16 Working voltage: 9-36V DC Oil pressure: 10-184ohms, display 0-145 PSI Fuel level: 240-33 ohms, E-F. Temperature: 287.4-22.4 ohm, display 100-250F Style: Stainless Steel Plate Backlight: Red Fixing Hole Size: 52mm (2") Operation mode: LCD Display, Stepping Motor Color: Black The 6 Instrument Panels + Transmitters Include: Fuel, Voltmeter, Oil Pressure, Temperature, Fuel Sending Unit Voltage: 8-16V Speedometer Application: The driving distance cannot be reset, just like on a car, and the mileage will continue to increase Working voltage: 9-32V Fixed Size: 85mm (about 3-3/8 in) Operation Mode: LCD display with 7-color backlight Indication range: 0-200KM / H Signal: GPS Tachometer Indication range: 0-8000 RPM Description: Magnet movement gauge Size: 20 x 12x 10cm (7.87*4.7*3.9in) Small specification Working voltage: 9-32VDC Fixed size: 52mm 2-1/16. Input range Oil pressure: 10-184ohms, display 0-145 PSI Fuel level: 240-33ohms, E-F. Temperature: 287.4-22.4ohms, display 100-250F Voltage: 8-16V NOTE Connection tips: The red + orange wire-positive pole; the blue wire-negative pole; the black signal wire-the sensor. (Voltmeter has no black wire) Installation tips: Before installation, first make a hole in the panel (diameter: 52-53mm), and at the same time make sure there is a space (70mm in the backyard of the panel) The Package include 6 x 52mm gauge 6 x Multi-plug socket