Chief Gear Pumps (7/8’’ Dia. Keyed Shaft) GP-F25-39-P-C 70439: 2 Bolt B Flange Mount, 2.44 CID, 21.13 GPM @ 2000 RPM, 3650 PSI, 3000 RPM, SAE #16 Inlet and SAE #12 Outlet Ports, CW Rotation, 252176

Pay with

Chief Gear Pumps Features

• Chief Gear Pumps (7/8’’ DIA. Keyed Shaft)

• 2 Bolt B Flange Mount, 2.44 CID

• 21.13 GPM @ 2000 RPM, 3650 PSI, 3000 RPM

• SAE #16 Inlet and SAE #12 Outlet Ports, CW ROTATION

About Chief Gear Pumps

This pump line features an aluminum center section and cast iron end plate construction, high pressure Hydraulic Gear Pump with 10 displacement sizes from 1.34 to 5.43 cu.in/rev ( 22 to 89 ml/rev ). The standard mounting flange is SAE-B (2 Bolt), 7/8 inch diameter parallel keyed drive shaft and SAE threaded ports., Recommended working conditions: FILTRATION: 25 micron or better OIL VISCOSITY: 6 to 200 cSt INLET PRESSURE: 12 to 32 psi abs. OIL TEMPERATURE: -25 to 80 degrees C (-12 to 175 degrees F). AMBIENT: -22 to 55 degrees C (-8 to 130 degrees F), 7/8" Diameter Stright Keywed Shaft 1 1/4" Long - 2 Bolt B Mount.