Peterson Real Fyre Electronic Non-standing Pilot Kit With Mounting Bracket - Propane Gas

Pay with

About Peterson Real Fyre Electronic Non-standing Pilot

Peterson Real Fyre Electronic Non-Standing Pilot Kit With Mounting Bracket - Propane Gas. EPK-1M-AD/LP. Gas Log Safety Pilot Kits. This Peterson Real Fyre Pilot Kit is designed for use with Peterson Real Fyre Vented gas log sets using Propane Gas. It can be used with a vented match lit log set to add basic on/off wall switch or remote control and non-standing pilot. It can also be used in place of a manual safety pilot kit. Unit is designed to cut down on clutter in the fireplace by removing the gas line and pilot valve assembly from inside the fireplace. Control box must be installed outside of fireplace and wiring for the electronic non-standing pilot must be run from the control box to the fireplace gas log set. Unit must also be hard wired to a light switch for basic on/off wall switch operation. Best suited for new construction. To be used with 12 - 30 inch standard G4 and G45 burners, 12 - 16 inch see-thru G4 burners, or 18 - 30 inch see-thru G45 burners. Includes 48 inches of wiring from the control box to the log set. Powered by 110 volt AC adapter.