We specialize in hard to find items
All Categories
Geberit 111.798.00.1 Toilets and Bidets
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Geberit 111.798.00.1 Toilets and Bidets Features
-
Design freedom – choose a toilet bowl from any leading ceramic manufacturer; pair with stylish Sigma series flush actuators or compatible flush buttons
-
Easy cleaning – clean the entire floor with a damp mop, no bending or kneeling
-
Improved accessibility – requires less space than a standard toilet, enhancing safety and comfort; adjustable bowl height meets personal preference or ADA guidelines
-
16-Gauge, powder-coated, structural-steel tubing rated to 880 lbs. (400 kg) without damage to finished wall or carrier unit
-
Water savings – Flush volume is 1.6 / 0.8 GPF saves thousands of gallons every year
-
Superior function – engineered Geberit fill and flush valves eliminate problematic chains and flappers that corrode and fail
About Geberit 111.798.00.1 Toilets And Bidets
In-Wall Duofix carrier system and Sigma concealed tank with actuator flush panel or pneumatic push button for wash down wall- hung toilets. System shall fit within minimum 31/2” (90 mm) framing wall or plumbing chase, with wood construction or steel framing members placed 193/4” (500 mm) apart. Framing members should be capable of supporting a 880 pound (400 kg) load without damage to the wall. Water supply shall have flow diameter no smaller than 1/2” (13 mm) copper tube, and a minimum flow pressure of 2 PSI (0.01 MPa). The toilet bowl shall be a third party listed, 2-hole wall-hung 1.6 GPF (6 LPF) or 1.28 GPF (4.8 LPF) single-flush, 1.6/0.8 GPF (6/3 LPF) or 1.28/0.8 GPF (4.8/3 LPF) dual-flush. The carrier frame shall be adjustable for bowl rim heights from 15” to 19” (381 to 483 mm). Actuator flush panels shall be diecast zinc, molded plastic or fabricated stainless steel and plated to preserve material integrity. All components shall be compliant with applicable codes and product standards.
