We specialize in hard to find items
All Categories
60KTYZ Synchronous Gear Motor 30RPM Dual Bearing AC Motor CW/CCW Control 115V 60Hz 10W
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
60KTYZ Synchronous Gear Motor 30RPM Dual Bearing AC Features
-
115V/60Hz 30rpm/min low speed AC synchronous motor,CW/CCW control, which can be rotated counterclockwise or clockwise by adjusting the wiring method.the motor lead wire is waterproofed at the outlet of the outer casing
-
The diameter of the output shaft is 0.351 inches (8 mm), and it is supported by two ball bearings, the axial sway is less than 0.3mm, the noise is low and the motor runs smoothly and reliably
-
High torque of the motor: rated output torque 6Kg.cm, Good low-voltage starting performance:low-voltage start ≥98V,Low power consumption:rated power 10W
-
The motor can work continuously.Special design of the motor, using UL-certified copper wire, winding temperature rise ≤70K. According to the test, when the ambient temperature is 82°F, the max shell temperature is 145°F,Don’t touch the shell
-
This motor has been widely used in agitated beverage machines and low-speed machines , and its performance is stable and reliable, and it is trusted by users
About 60KTYZ Synchronous Gear Motor 30RPM Dual Bearing AC
This 60KTYZ synchronous gear AC motor has been used for many years in agitating beverage machines and low-speed turning appliances. Its performance is stable and reliable, and it is trusted by customers. It has the following technical features: (1) Rated voltage: AC 115Volts (2) Operating frequency: 60Hz (3) Output shaft speed: 30rpm/min (4) Rated power: 10 Watts (5) No-load current: ≤100mA (6) Rated output torque: 6Kg.cm (7) Low voltage start: 0.85Un (8) Direction of rotation: can be rotated clockwise or counterclockwise (9) Motor winding temperature rise: ≤70K (10) Insulation class: E class (11) Insulation voltage: 1500V/1min (12) Operating capacitance: 1uF/630V (13) Noise: ≤45dB, and no abnormal noise (14)The diameter of the output shaft is 0.351 inches (8mm), and the diameter of the mounting wheel matching the output shaft is between 0.361 and 0.317 inches. (15) Axial movement: ≤0.3mm (16)The output shaft bearing uses 2 ball bearings, the average service life of motors is over 20000 hours under normal use. (17)This synchronous motor provides 1 year warranty. (18) The motor can work continuously under 120V/60Hz, but shell will generate heat. It has been tested that at an ambient temperature of 82°F, when the motor naturally dissipates heat, the max shell temperature is 145°F. Please isolate and protect it during use. Don’t touch the shell to prevent burns.
