CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit 270oz-in 76mm 3A Dual Shaft,TB6560 MD430 Driver,Mach3 Control Card Breakout Board 24V DC CNC Controller Kit for CNC Router Engraving Machine

Product ID : 25252309

Available options (color, size, package, etc). Prices may vary.

---

  Share   Tweet

share more:

---

Galleon Product ID 25252309

UPC / ISBN 785004502261

Shipping Weight 13.78 lbs
I think this is wrong?

Model

Manufacturer RATTMMOTOR

Shipping Dimension 10.31 x 10.24 x 6.34 inches
I think this is wrong?

See more product information!

-

Save 19%

Before ₱ 19,152

₱ 15,588

Price Tracker

+ ₱ 5,880
International Shipping

+ ₱ 2,058
International Shipping

via AIR via SEA

This item ships longer than average delivery time. Click here to open chat and know how long it will take.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original

Pay with

CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit Features

• ♞【Nema23 Stepper Motor】 23HS8430B Nema23 Stepper Motor / Holding Torque: 270 oz-in ; 180N.cm / Motor Size:57x57x76mm / Phase: 2 phase / Motor Lead : 4-Lead / 1.8° Step Angle / Type:Hybrid

• ♞【Stepper Motor Driver】TB6560/MD430 Stepper Motor Driver / Current: 3A / Support voltages : 12-34V DC / Step frequency up to 100khz / 2 phases bipolar driver / Full step, half step, eight step and sixteenth step

• ♞【5 Axis V5 Breakout Board】 Comes with DB25 parallel cable and USB cable ; Support Mach3,KCAM4,EMC2 and other software ; 5-way input interface, you can connect limit switch and stop switch,reset,knife signal;Data transfer speed can up to 10MBit/s

• ♞【Power supply】350W,24V/14.6A switching power supply; Output Voltage:24V ; Input: 110-120V AC or 220-240V AC

• ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.

About CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit

Package include:   4 x TB6560 MD430 single axis driver 4 x 23HS8430B stepper motor 76mm 270oz-in dual shaft  1 x 350W 24V DC switching power supply 1 x 5 axis breakout board   1 x DB25 parallel cable 1 x USB cable English user manual for breakout board and stepper motor driver will send by email. TB6560 MD430 Low noise of stepper motor driver  1. Introduction MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%). MD430-HZ 2. Features 1) Single-chip motor driver for sinusoidal microstep control of stepping motors 2) Power on in indication led 3) 3Amps-34Volts(Supply voltages:12-34DC) 4) Full step, half step, eight step and sixteenth step(selection with dipswitches) 5) Torque (100%, 75%,50%, 20%) 6) Work Current (0-3A selection with SW1/SW2/SW3) 5 axis CNC Breakout board interface adapter board  full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control; Stepper Motor General Specification: Step angle accuracy:+ -  5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy:+ - 20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature ----------—20deg  ----  +50deg Insulation resistance:100ohm  Min,500VDC Insultion Strength--------500VAC for one minute Datasheet (23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque) Switching power supply 350W 24V/10 A,single output switching power supply