X
Xypex Concentrate
Xypex Concentrate
Xypex Concentrate
Xypex Concentrate
Xypex Concentrate
Xypex Concentrate

Xypex Concentrate

Product ID : 46565047
4.1 out of 5 stars


Galleon Product ID 46565047
UPC / ISBN 057926000607
Shipping Weight 60 lbs
I think this is wrong?
Model CON
Manufacturer Xypex
Shipping Dimension 17.99 x 12.01 x 10 inches
I think this is wrong?
-
40,847

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

Xypex Concentrate Features

  • Resists extreme hydrostatic pressure

  • Becomes an integral part of the substrate

  • Can seal hairline cracks up to 0.4 mm

  • Allows concrete to breathe

  • Highly resistant to aggressive chemicals


About Xypex Concentrate

Description Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials. RECOMMENDED FOR: -Reservoirs -Sewage and Water Treatment Plants -Secondary Containment Structures -Tunnels and Subway Systems -Underground Vaults -Foundations -Parking Structures -Swimming Pools ADVANTAGES -Resists extreme hydrostatic pressure -Becomes an integral part of the substrate -Can seal hairline cracks up to 0.4 mm -Allows concrete to breathe -Highly resistant to aggressive chemicals -Non-toxic -Does not require a dry surface -Cannot puncture, tear or come apart at the seams -No costly surface priming or leveling prior to application -Does not require sealing, lapping and finishing of seams at corners, edges or between membranes -Can be applied to the positive or the negative side of the concrete surface -Does not require protection during backfilling or during placement of steel, wire mesh or other materials -Less costly to apply than most other methods -Not subject to deterioration -Permanent