All Categories
Get it between 2025-08-05 to 2025-08-12. Additional 3 business days for provincial shipping.
【Package】Contains 2 Dome Filters With Activated Carbon and 2 Black Faucets
【Material: Diatomite Sintered Ceramic】 The main body is made of sintered 100% natural diatomite,contains no chemical synthesis material, has excellent high-temperature and high-pressure resistance. The base is made of BPA free plastic.
【High Quality Activated Carbon】 Coconut Shell Activated Carbon can reduce chlorine and oder in water and improve the taste of water
【SIZE】PORE SIZE of 0.2 to 0.5 micron. The purpose of filtering water is to physically remove suspended particles in the water. The smaller the pore size, the less pollutants.
【Food Grade】The Water Bottle Jug Reusable Spigot Spout is made of high-quality polypropylene (PP) without BPA. Tasteless and non-toxic
【Please determine the size of the opening】Thread diameter: 3/4 inch (18 mm), shaft length: 1 inch. Washer diameter: 30mm. Fits into 3/4 inch hole. Suitable for most water dispensers, coolers, wooden barrels, glass bottle,water jug 5 gallon, watermelons,ceramic water dispenser
【Application: all Water System】 This Replacement Filter is for all Water Filtration systems both countertop and water cooler models. It can also be used with household buckets or other water resevoir spigot to DIY a water filtration system.
Details Material:Ceramic Function:Direct drink Water treatmetn machine type: pre-filter Certification: CB Depending on the water quality, we recommend maintaining the ceramic filter at least once a month, or as many times as needed. As the use time increases, trapped dirt and contaminants will begin to accumulate, forming a layer of paint on the surface of the ceramic filter. Use a scouring pad or soft brush to scrub the surface of the ceramic dome in cool water to clean the holes in the ceramic Tap Installation Notes: 1. Twist washer 1 onto the faucet. (Washer 1 is installed with slope side facing towards hole) ; 2.Push the faucet through the hole of crockbottle; 3.Twist washer 2 onto the faucet (the slope side is facing against the hole); 4.Hold the faucet and screw the nut in,tighten the nut until it is firmly in place and adjust as needed.