CANMEELUX Waterproof Housing for Olympus TG-7,Underwater Camera Housing Diving Up 60M/195FT Inbuilt Leak Alarm (White)

Pay with

CANMEELUX Waterproof Housing for Olympus Features

• COMPATIBLE: Underwater camera waterproof housing is specially designed for Olympus TG-7. Easily operate all Camera controls underwater with an external button

• EXCELLENT PROTECTION: With high strength shell can be waterproof, dustproof, shockproof and freezeproof, this waterproof housing up to 196ft/60M. Install a safety lock to ensure better water resistance; At the same time, it is equipped with O-ring to maintain the waterproofness of the waterproof shell; Inbuilt leak detection ensor is used to remind you if there is a leak, if there is water, it will light up and sound an alarm

• CAN BE USED WITH FLASH: Underwater Camera Waterproof housing is to trigger external strobe via fiber-optic cable. There are two optical sensor ports on the left, can accommodate two external flash unitsCamera flash will not work as a normal flash inside the housing when doing macro photography (take this into account before purchasing)

• UNDERWATER ZOOM: When the camera is in the housing case, it can achieve zoom; Underwater camera housing case is suitble for any underwater photographer, surf photographer and other enthusiast of water relatedMeikon photography or sports; You can enjoy a lot of fun of taking a wonderful underwater world

• MULTIFUNCTIONAL STRUCTURE: Front of the housing has 52mm & 67mm Thread and compatible with all 67mm accessories such as filter, macro lens, wet wide angle correctional dome port lens etc. Stainless steel plate at the bottom for mounting it to underwater tray. Equipped with 1/4" tripod connectors for diving light mounting system

About CANMEELUX Waterproof Housing For Olympus

Unique Design: Vacuum Pump System can completely remove the air from the camera's waterproof case O-Ring: There are two O-rings inside the waterproof shell. The O-ring can make the shell more sealed, so as to achieve better waterproofness(Apply grease to the O-ring and make sure the O-ring and the groove of the waterproof shell are clean before use) Preparation Before Entering The Water: 1. Before installing the waterproof shell on the camera for underwater shooting, first put it in water with a depth of about 1M to ensure that there is no water leakage 2. Repeatedly operate the buttons and dial of the waterproof camera case to ensure that the camera's internal functions are all normal 3. Make sure the safety lock is locked How to Clean: 1. Rinse the outside with tap water, then wipe the water with a soft cloth; 2. Wipe the inside of the diving shell with a dry soft cloth. Do not use water and other solvents to clean the inside of the waterproof housing(It is recommended to take out from the sea water Then fasten the waterproof shell and soak it in fresh water for 30 minutes.) Packing Included: 1 x Underwater housing 1 x Red filter; 1 x Yellow filter; 1 x Wrist strap 1 x Shoulder strap 1 x Spare O'ring 1 x Dust-free cloth 1 x Shade cover 1 x User manual Note: 1. Do not use the waterproof shell in water with a water temperature below 0° and above 40° or a depth of more than 60M 2. Avoid placing the waterproof case in a hot, cold and humid place 3. When storing, keep the waterproof shell open, which can prevent the O-ring of the waterproof shell from being deformed, so ensure that it remains waterproof; When not using for a long time, please remove the O-ring seal