Zemoner 3/8" 6 Ft. Fuel Line with Hand Bulb Primer Pump & 10 Pcs Hose Clamps for Boat Marine Outboard Gas Diesel Petrol

Pay with

About Zemoner 3/8" 6 Ft. Fuel Line With Hand Bulb Primer

Instructions: 1. Continuously pinch the primer to identify the end where the air is blown out is the oil outlet. The other end is the oil inlet. (You can also identify the oil port in the direction of the arrow.) 2. Connect the oil inlet to the car's fuel tank and the oil outlet to an oil drum. Adjust the appropriate distance of the pipe and the height difference between the oil inlet and the oil outlet. Note: At the beginning of extraction, you need to hold down the oil outlet while pinching the primer forcefully. When the gasoline fills up the oil inlet pipe (the section from the oil inlet to the primer), release the oil outlet and the gasoline will flow through the pipe to the oil drum. After that, there is no need to continue squeezing the primer. Fuel Line: Size: inner diameter 10mm; outer diameter 17mm Length: 2 meters/6Ft. Material: rubber + nylon Adaptation temperature: -30℃-120℃ Hose density: 1.35g/cm³ Working pressure: 2MPa/300Psi Burst pressure: 8MPa/1200Psi Scope of application: fuel systems for automobiles, ships, helicopters, ships, motorcycles, etc. Bulb Primer Pump: Material: rubber and aluminum alloy Suitable size: 10mm Appearance: stepped port Advantages: resistance to diesel, gasoline, and aging Opening pressure: 0.2bar Working pressure range: 0.2-6bar Operating temperature range: -30 ℃-130 ℃ Hose Clamps: Material: 304 stainless steel Size: suitable for 10-16mm Bandwidth: 8mm Thickness: 0.6mm Package Content: 1 x 3/8" 6 Ft. Fuel Line 2 x Bulb Pump 10 x Hose Clamps