16 inch 400mm Impulse Sealer, Manual Bag Sealer Heat Sealer, Adjustable Timer Electric Heat Seal Bag Sealer Sealing Machine with 2 Free Replacement Kit Tabletop Impulse Sealer, Blue

Pay with

16 inch 400mm Impulse Sealer, Manual Bag Sealer Features

• {Manual Heat Bag Sealer Specifications}: - Size:16 inch(FS-400), the width of heating replacement kit is 2mm, after sealing the bar size of the bag is 3mm. Comes with 2 replacement kits. Upgrade heavy duty thicken iron housing case

• {Safety And Energy Conservation Impulse Heat Sealer}: - Odorless, durable, reinforced and compression, make sure working life double longer than normal sealing machine. Could seal more than 10000 bags

• {Ergonomic Bag Heat Sealer}: - 8 temperature adjustment, ensures this heat seal closer universal to seal different types of bag no matter how thickness. Labor-saving design with long handle, provides comfortable using experience

• {Instantly And Easily Using}: - No power switch and warm up time needed. Just insert the AC power cord into the socket, adjustable timer creates perfect seals for varying bag thicknesses. Max seal thickness: 0.4mm. Auto LED Indicator: No need to count or gauge how long to apply heat, the LED light is only turned on when the heating element is operating. When the indicator light goes out, the power is automatically disconnected

• {Wide Range of Uses}: - Built-in fuse for safe using, can be conveniently used to encapsulate all kinds of candies, food, general goods, stationery and etc, ideal for household, supermarkets, kitchen, retail, produce, grocery stores, etc. Perfect for Kel-F, Mylar, Polyflex, P.V.A.,Pliofilm, Tivac, Saran and all other heat sealable material bags

About 16 Inch 400mm Impulse Sealer, Manual Bag Sealer

Specifications: Impulsepower: 600W Voltage: 110V Max seal length: 400mm/16inch Sealing width: 3mm Max sealing thickness: 0.4mm Heat time: 0.2-2(sec) 8 Gears with adjustable temperature and time knobs: Freely control time and heat to meet different needs. Bottom heat dissipation design and fuse: Ensure safe use. Note: 1.The temperature should be adjusted during the first use. Press and hold the handle for 2 ~ 3 seconds for the best sealing effect. 2.If the sealing part is damaged when one is connected, it is because the heating time is too long. Please turn the knob counterclockwise to shorten the heating time. 3.If the sealing is not strong, it is because the heating time is too short, please turn the knob clockwise to extend the time. 4.If you find that the heat sealing machine has a strange sound during the movement, it may be that the transformer is a bit loose. You can tighten the four screws of the transformer and you can use it normally. 5.Keep the surface of the sealing machine clean to avoid the oxidation of residues, so as not to shorten the life of the heat seal. 6.Do not wipe the sealing surface with a damp cloth. 7.If the gasket under the heating belt is damaged, the short-circuit surface will damage the heating belt. Therefore, each time the heating belt is replaced, the integrity of the gasket should be checked. If damaged, replace with a new one. 8.When it is necessary to change the heating belt, the heating belt with the same specifications as the original one should be used. Please note that the sealing machine is a two flat plug product.