We specialize in hard to find items
(1)
AEDIKO 2pcs DC 5V Relay Module 4 Channel Relay Board Shield with Optocoupler Isolation Suport High/Low Level Trigger
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
AEDIKO 2pcs DC 5V Relay Module 4 Channel Relay Features
-
4 Channel Relay Module’s Path Can Be Triggered By High Level or Low Level Through Jumper Setting; Trigger Current of Opto-Isolator: 5mA
-
This 5V Relay Module is 4 Channel Isolated, Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input
-
5V 4 Channel Relay Module Comes with High-Current Relay,Maximum Load: AC 250V 10A;AC 125V 15A ; DC 30V 10A
-
This Module Design With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable and Stable
-
The Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Bolt Hole: 3.1 mm; 67*44.5mm (Spacing);Standard Interface Can Connect With Microcontrollers and be Controlled By a Wide Range of Microcontrollers Directly
About AEDIKO 2pcs DC 5V Relay Module 4 Channel Relay
Specifications:Channel: 4 ChannelWorking Voltage: DC 5VNormally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDCQuiescent Current: 5mAMaximum Current: 190mATrigger Current: 2 - 5mATrigger Voltage (LOW): 0 - 1.5VTrigger Voltage (HIGH): 2.5 - 5VInsulation Resistance: 100MΩ (500VDC)Action Time (Under Rated Voltage): Less Than 10msRelease Time (Under Rated Voltage): Less Than 5msPower Indicator (Green), Relay Status Indicator (Red)Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.Module Size: 73mmX50mmX18.5mm /2.87X1.97X0.73inch(L*W*H)Input Interface:DC+: Connect to Power Positive (According To the Relay Voltage Range)DC-: Connect to Power NegativeIN: Relay Module Trigger Pin (High or Low Level Trigger Optional)Relay Output:Normally Opened (NO) : Normally Open Pin ,NO Pin is Not Connect to COM Pin When Relay Off. NO Pin is Connect to COM Pin When Relay OnCommon Pin (COM) : Common Pin of RelayNormally Closed (NC) : Normally Close Pin , NC Pin is Connect to COM Pin When Relay Off. NC Pin is Not Connect to COM Pin When Relay OnHigh/Low Level Trigger:1. Low Level Trigger When Jumper and L Short Circuit2. High Level Trigger When Jumper and H Short CircuitPackage Contents:2x 4 Channel 5V Relay Module with Optocoupler
