All Categories
High Strength Epoxy Glue/Adhesive, Void Filling & Patching
Easily Spreads, Thixotropic/Non-Sagging- Will Not Flow At Rest
Conforms To Hundreds of Aerospace/Military/Naval Materials Specifications
Extreme Conditions Adhesive
Permanent Glue For Wood, Concrete, Stone And Masonry
MAX BOND THIXOTROPIC A/B Industrial Grade is a high strength epoxy adhesive used in all types of bonding application for wood, metals, plastics, stone, concrete, and other masonry products. Its mixed consistency is designed to be thixotropic or non-sagging that offers flow control for most bonding applications. It is mixed equal parts resin to curing agent and offers up to 60 minutes of working time and can be handled after 4 hours of room temperature cure. MAX BOND THIXOTROPIC demonstrates excellent adhesion, toughness and water resistance suitable for the marine boat building, aerospace grade adhesive, automotive assembly, and composites bonding application TYPICAL USE AND APPLICATION Strong Adhesive For Bonding Wood, Metals, Concrete, Fiberglass Boat Deck Construction Fiberglass Boat Hull Construction Fillet Bonding Scarfing Adhesive Vertical Bonding Adhesive Wood Sealant And Protective Waterproofing Wood Laminating, Patching, Gap Filling CONFORMS TO AEROSPACE/MILITARY/NAVAL SPECIFICATIONS MIL-A-8623 T1 MS-511 MMM-134 Type1 and Type 2 OS-9923A Boeing BMS-5-29 Complies to NASA Requirements For Low Outgassing Polymers PHYSICAL AND MECHANICAL PROPERTIES Mix Ratio: 1:1 By Weight Or By Volume Mixed Consistency: Gel-Like Working Time:45 to 60 Minutes Handle Time: 4 to 6 Hours At 75°F Full Cure Time: 24 to 48 Hours At 75°F Hardness: 78 to 80 Shore D Tee-Peel Strength:4 Lbs. Per Inch Width Compressive Strength:15,800 psi @ 77°F (25ºC) Tensile Shear Strength: 3,700 psi @ 77°F (25ºC) 2,200 psi @ -112°F (-80ºC) 1,450 psi @ 212°F (100ºC) Elongation Maximum Yield: 2.3% Service Temperature-67°F to 250°F