We specialize in hard to find items
All Categories
25ml Hydrothermal Synthesis Autoclave Reactor Stainless Steel Vessel Kettle with PTFE Liner for Rapid Digestion of Insoluble Material, 220? 3Mpa 304 Steel High Pressure Digestion
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
25ml Hydrothermal Synthesis Autoclave Reactor Features
-
DISSOLUTION PRE-TREATMENT: Our Hydrothermal Autoclave Reactor can be used for sample dissolution pre-treatment in analysis like atomic absorption spectroscopy and plasma emission. And, it can be used for synthesis of small doses. Achieving the purpose of rapid digestion of insoluble substances by taking advantage of strong acid/alkali, high temperature and pressure confined environment available.
-
HIGH & LOW TEMPERATURE RESISTANCE: The working temperature can reach 250 degrees centigrade, even if the temperature drops to -196 C, it can maintain 5% elongation.
-
PTFE MATERIAL: Hydro-thermal synthesis reactor is a closed vessel, capable of decomposing insoluble substances. PTFE lining can bear high temperature and high pressure, resistance, almost insoluble in all solvents, physical inert.
-
SCIENTIFIC FIELD: Hydrothermal synthesis reactor is widely used in new materials, energy, environmental engineering and other fields of scientific research and experiments, is the university teaching, research institutions commonly used small reactor.
-
SUGGESTED HEATER: The Hydrothermal Autoclave Reactor is recommended use a heater with programmed heating, muffle furnace is not recommended, because of temperature overshooting and temperature heating rate exceed the limit will to melting of the lining.
About 25ml Hydrothermal Synthesis Autoclave Reactor
Specification: Condition:100% Brand New Item Type: Hydrothermal Autoclave Reactor Material: 304 Stainless Steel + PTFE Liner Maximum Pressure: 3Mpa Security Pressure: 2Mpa Maximum Temperature: 200 ℃ Security Temperature: 180 ℃ Heating, Cooling Rate: 5 ℃ / min Capacity: 25ml Operation Method: 1. Place the synthetic reactor in the heater and raise the temperature to the required temperature ( less than prescribed safe temperature ) 2. At the end of the reaction, the cooling rate should be ≤ 5c/min strictly in order to avoid damaging the reactor. 3. After confirming the temperature in the kettle is lower than the boiling point of the solvent in the reactant, loosen the cover of the kettle, and then open the cover of the kettle. 4. Pour the reactant into the PTFE liner and ensure that the feeding is less than 80%, and for the first time must less than 30% 5. Install the kettle body correctly and tighten the kettle cover.The hydrothermal synthesis reactor is placed on a heater and heated to the desired reaction temperature at the rate specified. 6. When the reaction is complete, it should be cooled, and the cooling rate should be strictly followed to ensure safety and the service life of the reactor. 7. When confirming that the temperature in the abdominal cavity is below the boiling point, the solvent reaction system can only open the lid after subsequent operations. 8. The hydrothermal synthesis reactor should be cleaned after each use to avoid corrosion. Package List: 1 x Hydrothermal Autoclave Reactor(5 parts) 1 x Boost Rod
