All Categories
Travsafe Tempo III rope adjuster with integral carabiner
Three travel carbon steel O-rings
60-Feet (18 m) of 1/2-Inch (125 mm) Kernmantle rope
Two 6-Foot (18 m) endless slings
Heavy-duty storage bag
Rotating side plates
Captive lock system via carabiner attachment
Roll-over cam braking system minimizing wear
Heat-treated alloy steel construction
Minimum breaking strength: 11, 200-Pound (50 kN)
The Travsafe Tempo III temporary horizontal lifeline was designed to be used by a maximum of three persons. It provides a simple and lightweight solution to temporary horizontal fall-arrest applications. It can be adjusted from 3 to 60-Feet (1 to 18 m) and must be installed horizontally with a slope of less than 15-Degree. It is compact, light and easy to carry with its storage bag. Applicable standards: manufactured in accordance with ANSI, OSHA and CSA requirements; meets and/or exceeds 5, 000-Pound (22. 2 ken) strength requirements for anchorage point. Kernmantle rope of 1/2-Inch (12. 5 mm) which can be adjusted from 3 to 60-Feet (1 to 18 m) between two anchorage points. Allows simultaneous use by three users. Quick and simple to install. Allows safe access to horizontal locations. Applications: horizontal lifeline travel for platform working and scaffolding, window washing, suspended stages, pylons, roof work and construction sites. LIFELINE: 1/2-Inch (12. 5 mm) braided Kernmantle rope 60-Feet (18 m) long Minimum breaking strength: 8, 200-Pound (36, 4 kN) Pass-through combination clamp/thimble at anchor point TEMPO III ROPE ADJUSTER: Permanently assembled on the lifeline Rotating side plates Captive lock system via carabiner attachment Roll-over cam braking system minimizing wear AUTOLOCKING CARABINER – P202Z: Permanently assembled on the rope adjuster Heat-treated alloy steel construction Minimum breaking strength: 11, 200-Pound (50 kN) Gate strength: 3, 600-Pound (16 kN) Gate opening: 1-Inch (26 mm) Captive pin ENDLESS SLINGS – V41326: High tenacity polyster filament webbing 6-Feet (1. 8 m) Width: 11/8-Inch (27 mm) Thickness: 5/64-Inch (2 mm) Tensile strength of 6, 700-Pound (30 kN) which exceeds 5, 000-Pound (22. 2 kN) strength requirement for anchorage connectors Webbing is heat-cut to prevent fraying AUTOLOCKING CARABINER – PM11Z: Heat-treated alloy steel construction Minimum breaking strength: 5, 000-Pound (22. 2 kN) Gate strength: 3, 600-Pound (16 kN) Gate opening: 3/4-Inch (19 mm) O-RINGS – 47700: Ensure safe and easy travel on lifeline 3-1/8-Inch (80 mm) Carbon steel CARRYING BAG WITH HANDLES – XB0820: With handles 8 x 20-Inch (20 x 50 cm)