Aopin Water Level Sensor Switch Stainless Steel,Liquid Level Sensor Float Switch, Plastic Ball Float Controller For Water Pump Fish Tank Cistern Sump Filter Aquarium Swim Pool Garden Pond Liquid 1 Pcs

Pay with

Aopin Water Level Sensor Switch Stainless Features

• ★Specification★: Max Switching Current : 0.5 A ; Max Breakdown Voltage : 220V ; Max Carry Current : 1.0 A ; Max Pressure: 100 PSI / 248˚F (120˚C) ; Wire Length : 300mm ; M10 Metric Thread. Model: ZS12010-2.

• ★Application★: Liquid level sensor is a device used to sense the liquid level in the storage tank. This product can be used for liquid level sensing, alarm, signal transmission in water dispensers, water purifiers, water heaters, coffee machines, small refrigerators and other home appliances. Specially used for fish tanks, water pumps, cooling barrel, ponds, agricultural equipment, cistern alarm, sump filter aquarium swim pool, garden, well, water towers and other fields.

• ★HIGH QUALITY MATERIALS★: The liquid level switch is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistance. Stainless steel even can work at temperatures up to 248˚F(120°C). The maximum pressure resistance of the stainless steel float can reach 30kg/cm2. Contacts are plated with rhodium, its life span can reach 2 million times. Switch liquid controller can be installed above or on side of the liquid level as required.

• ★HIGH SENSITIVITY★: Our ring magnet inside the float accurately controls the on and off of the reed switch. Sealing gasket can prevent water from leaking from the mounting hole. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation, greatly extending the service life. Connection part adopts waterproof solid glue, which has better waterproof performance and good sealing effectand to protect the safety of users!

• ★DIY CAN BE ADJUSTED★: Normally Closed (NC) and Normally Open (NO) can be adjusted manually, you need to use a vise to pull down the circlip under the float switch, Then adjust the direction of the float to realize the conversion between "NC" and "NO". The normal state is "NC". The liquid with high viscosity, generally should choose a larger outer diameter Float. If you want to control a large liquid range, you can use 2 different length combinations, or buy a double float level switch.

About Aopin Water Level Sensor Switch Stainless

WHY CHOOSE OUR LIQUID LEVEL SENSORS ? HIGH SENSITIVITY Our float switch has strong anti-interference and high sensitivity. The ring magnet inside the float can precisely control the on and off of the reed switch. The signal transmission is very accurate and will not cause trouble due to interference.   ANTI-LEAKAGE DESIGN TO ENSURE THE SAFETY OF USERS Liquid level sensor is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation. Wiring is coated with waterproof solid glue. The purpose is to prevent liquid from entering the sensor and avoid unnecessary safety hazards. The sealing gasket can prevent water from leaking from the mounting hole.   DIY NC and NO can be adjusted manually, you need to use a vise to pull down the circlip under the float valve, and then adjust the floating direction. You can even buy multiple sensors of different lengths or dual floats to combine and match to achieve more sophisticated and complex level detection and transmission.   MULTI-PURPOSE Water level sensor is often used for liquid level detection, on-site indication, remote signal transmission, and atmospheric storage tank liquid level alarm. This liquid controller can be used for liquid level sensing, alarm, signal transmission in water dispensers, water purifiers, water heaters, coffee machines, small refrigerators and other home appliances.   Note: Liquid level switch uses a magnet to sense reed switch, so the measured liquid level should be free of iron filings, otherwise it will affect the action of the float on the switch.