HFBTE AGY-15 Digital Fruit Hardness Tester Fruit Penetrometer for Apples Pears Strawberries and Grapes Etc Fruit Sclerometer Measurement 0.2 to 15 kgf/cm2 (x 105 Pa) Range

Pay with

HFBTE AGY-15 Digital Fruit Hardness Tester Fruit Features

• ❤❤(1)AGY-15 Digital Fruit Hardness Tester which are to measure the hardness of apples, pears, strawberries and grapes, etc. It is a suitable instrument for fruit company, fruit farm, fruit research institutions to test the ripeness of fruits.

• ❤❤(2)Compact size, low weight and ocular reading, it is suitable to use on the scene.

• ❤❤(3)Wide Measurement Range: 0.2～15 kgf/cm2 (×105 Pa),high precision,it's for professional testing.

• ❤❤(4)Standard fruit hardness unit display:kgf/cm2,Pressure needle diameter: Ø11.1mm, Depth of pressure needle: 10mm.

• ❤❤(5)If you have any questions,please let me know,i will help you to solve it.

About HFBTE AGY-15 Digital Fruit Hardness Tester Fruit

Introduction: ❤❤The Digital Fruit Sclerometer has advantages of high precision,easy operation and carry. Features: 1.Digital display,easy reading,high precision; 2.Light weight,small size,easy to carry; 3.Standard fruit hardness unit display:kgf/cm2 4.The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off if no operation in 10 minutes. 5.Two test mode:Peak hold and Real-time; Technical Specifications ❤❤Model: AGY-15 ❤❤Measurement Range: 0.2～15 kgf/cm2 (×105 Pa) ❤❤Load scale value: 0.01kgf/cm2 ❤❤Precision:±1% ❤❤Pressure needle diameter: Ø11.1mm ❤❤Depth of pressure needle: 10mm ❤❤Power: 3.7V lithium battery; Charging time: 4~6 hours ❤❤Continuous usage time of battery:About 10 hours; Battery life: ≥300times ❤❤Charger: Inpu: AC 220V 50/60HZ; Output: DC 5V 1000mA ❤❤Stability: Temperature drift: 0.2uV/℃（0-60℃） ❤❤Zero temperature drift: ≤ 0.1%/8 hour/FS ❤❤Work temperature: 5℃～35℃; Transport temperature: 0℃～60℃ ❤❤Relative humidity: 15％～80％RH ❤❤Work conditions: No focus ,Non-corrosive in surroundings ❤❤Net weight: About 260g ❤❤Size:160mm×71mm×35mm Four,Button Function: ❤❤OFF/ON(start up ,shut down key):When press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge. ❤❤ZERO(zero key):The testing value on the screen can be zero when click this key. ❤❤SET(switch mode key):When press this key,enter the "Peak" mode.Press "SET"key for 4-5 seconds after starting up,and then loosen,can enter into the setting interface. ❤❤UNIT(unit key)Press "UNIT"key for 4-5 seconds,the digital value inverted display.