Latching Push Button Normally Closed Pneumatic Air Control Valve 2 Port 2 Way 2 Position 1/8" NPT

Pay with

Latching Push Button Normally Closed Pneumatic Air Features

• When the button is fully pushed, it will latch in the open position thus allowing the flow of air.

• When the button is latched, a twist of the button in the opposite direction will release it back to the closed position.

• A valve that is normally closed will not allow the flow of air when the button is not pushed.

• Can be mounted through four pre-drilled mounting holes that run through the side of the valve body.

• Maximum operating pressure of 116 PSI.

About Latching Push Button Normally Closed Pneumatic Air

TEMCo Industrial pneumatic air control valves feature a variety of manual actuators that allow the user to quickly change between a set of directions of flow, also known as "positions," in order to control the flow of pressurized air through desired ports. Thus, any single direction of flow, or "way," can be altered with a simple flick of a switch, press of a button, twist of a knob, or turn of a lever, as well as other manual options. Application of these control valves are suitable for any pneumatic task, from DIY projects at home to burly industrial use. With varying port sizes from 1/8", 1/4", 3/8", and 1/2" NPT, diverse valve body sizes and forms, as well as pre-drilled mounting holes through the body of the controller, you're bound to find the right TEMCo pneumatic controller for your needs. The most important feature to look for is the actuating type - the way in which you manually control the valve. Whether the controller you're currently looking at on this listing is or isn't the right one for you, take a moment to check out the other pneumatic control valves in our line and see if any of those and their features are better suited for your particular application. Cylinder Type: Spool Valve Acting Control: Latching Push Button Flow: Normally closed Ports: 2 Ways:2 Positions:2 Pressure Port NPT (in): 1/8 Port NPT (in): 1/8 Body Material: Aluminum alloy Interface Material: Alum/Plastic Working Pressure (PSI): 21.76 to 116 Maximum Pressure (PSI): 174 PSI Operating Temperature: -5 to 80°C Mounting Type: Body Panel Mount Hold Diameter (mm): 30