OneBom Lid for Beer Brew, Cornelius Keg Lid Stainless Steel with 20’’ Food Grade Silicone Tube & 2 Micron Diffusion Stone (Carbonation Keg Lid)

Pay with

About OneBom Lid For Beer Brew, Cornelius Keg Lid

Carbonation Lid for Corny Keg Stainless Steel with 2 Micron Diffusion Stone and 20'' Silicone Tube Description If you use a keg, cooler, and tap for carbonated drinks, the Stainless Steel Keg Lid, Tubing, and Stone Diffuser Water, Soda, Beer Homebrew CO2 Carbonation Cornelius Kegerator is a needed system upgrade. This lid creates an easy, effective beverage force carbonation process with no need to shake your keg. It has never been easier to carbonate beer, soda, water, juice, tonic, or seltzer water at home. For best results, chill the beverage beforehand so the CO2 absorbs faster and you are ready for your weekend bash. How to Use? To use, install the lid on your beer keg and chill the keg to 40 degrees Fahrenheit or colder. When the keg has been chilled, attach the gas line to the post on the lid and set the dispensing pressure to 25 PSI. After 6 hours, remove the gas line. Attach your gas line to the gas in post on your keg and release the head pressure in the keg so it is around 6-8 PSI. Your beer will now be carbonated, and you can adjust your gas to whatever pressure you want to dispense at. Package Includes: 1 x Cornelius Style Carbonation Lid 1 x 2 Micron Air Stone 1 x 20'' Silicon Tube (ID x OD :1/4''x5/16'') Warm Tips: ☆Release pressure to remove lid ☆ Working pressure 80 PSI (550kPa) ☆CO2 absorbs better when cold 34-40°F ☆After your beer is carbonated replace the carbonation lid with a standard lid. Clean and store carbonation lid.