All Categories
Specification: Working voltage: DC 3.6V~24V Maximum load: 2A Static current: 3.6 mA ~ 5.5mA Working frequency: 433MHz Reception sensitivity: ≥ -107dBm Output DC3.6V~DC24V Size: 22.5 mm x 11mm x 8mm (length × width × high) Mini size support coding format 1527 learning code Input: DC3.6V~DC24V Output: DC3.6V~DC24V Modulation mode:ASK (superheterodyne) Number of stored remote controls: ≤ 10 Working mode: Momentary, Toggle, Latching Mode Learning style: Learning Button Steps: Clear Code: Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out. Momentary Mode:Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds . Toggle Mode : Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds. Latching Mode:Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.