Lab Pro Hi-Precision F-SA-T Tweezers, Teflon-Coated - Swiss Made, Corrosion Resistant, Non-Ferrous (OAL: 120mm, 4-¾”)

Pay with

About Lab Pro Hi-Precision F-SA-T Tweezers, Teflon-Coated

Whether it is used by a watch-maker for the intricacies of crafting a fine time piece, or the scientist who requires sensitivity and precision both artisans and scientists alike know that high-precision, teflon-coated tweezers are an invaluable asset. A high-quality tweezer, the Swiss-made, high-precision Teflon coated tweezer, features a non-ferrous, corrosion-resistant finish with thin, square-headed tips and is well balanced to fit comfortably in your hand for effortless performance. The Lab Pro Hi-Precision Tweezer is the ultimate tweezer—corrosion resistance and toughness are primary requirements. Technical Specifications: Material: This solvent-based liquid Teflon coating is formulated with special blends of fluoropolymers and other high-performance resins to improve toughness and abrasion resistance Overall Length: 4.7” Tip thickness A (mm - in) - 0.08 - 0.003 Net weight (g-lb) - 15 - 0.033 Tip opening gap (mm - in) - 8 - 0.315 Mechanical Properties: State: annealed Density: 8.0 g/cm3 Hardness, Vickers: 230 HV Tensile strength, ultimate: 500-700 MPa Tensile strength, yield: 290 0.2% Yield stress: ≥ 200 MPa Elongation, break: 40% Modulus of elasticity: 200 GPa Thermal Properties: Coef. of lin. therm expansion: 16.0 E-6/°C 20°C-100°C Coef. of lin. therm expansion: 17.0 E-6/°C 20°C-300°C Specific heat capacity: 0.50 J/(g.K) Thermal conductivity: 15 W/(m.K) Continues use temperature: 350°C Max service temperature, air: 925°C Electrical Properties: Resistivity: 0.75 E-4 Ohm.cm Disclaimer: This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material.Lab Pro Inc declines all responsibility from an improper use of the product.