WaterCop LeakStopPlus Single-Point Leak Detection, 1/2 In. (WCLSLFA12)

Pay with

About WaterCop LeakStopPlus Single-Point Leak

WaterCop LeakStop .5 In. Single Point Detection and Automatic Shut-Off WCLSLF Single appliance LeakStop PLUS WaterCop system with 1/2 inch lead free valve detects water leaks and moisture accumulation at a single location :automatically shuts off the water supply. Recommended for appliances like water heaters. Two moisture sensor probes included to reduce or prevent water damage if a leak occurs. Hard wire LeakStop PLUS unit to connect to third party devices via conduit at the unit's bottom. Notifications: light, buzzer, auto dialer device or security/automation system. Homeowners or maintenance personnel get immediate notification that the water valve is closed. Please note this unit does not operate with other WaterCop sensors. Warranty: 2 years from date of original shipment. WaterCop LeakStop Plus .5 inch Valve System: Designed for a plumbing supply line installation. Install upstream of the appliance or area you wish to monitor. Place the two sensor probes where water is most likely to accumulate if a leak occurs. Ideal for water heaters which are vulnerable to leaks sometimes within a few years of installation. Nearly 8-million homeowners replace failing water heaters each year. LeakStop PLUS Specifications: Max working pressure â€" 125PSIG Ambient temperature â€" 35 degrees to 105 degrees F. Voltage â€" 12VDC 1 phase (includes 115V wall transformer, 20 foot cord) Valve â€" Full port brass NSF61G ‘Lead Free†1/2†NPT â€" 19 GPM (Gallons Per Minute) Sensor wires are each 10 ft. long Requires 110VAC power: power cord is 20 ft long. The WaterCop LeakStop .5 inch Valve System: Constantly monitors for accumulating moisture Valve remains closed until it has been manually reset .5 inch low lead brass valve. Manually open/close the valve with soft touch buttons on the actuator Made in USA