Vipeco Mini Infrared Digital Obstacle Avoidance Sensor Module Adjustable Board

Pay with

About Vipeco Mini Infrared Digital Obstacle Avoidance

Features:1. Super micro, and design the mechanical installation hole.2. Less power consumption, wide working voltage range. Use modulation signal transmitting, distance, anti-interference performance is good, can work under outdoor not direct sunlight (distance will be shorter).3. Range from 3cm to 100cm.4. The obstacle avoidance using the window technology, avoid the problem of critical region, sensors work is stable, the user directly using the output signal, signal jitter don't need to consider.5. The sensor is active infrared reflection detection, so the reflectivity and shape of the target is the key to detect distance. 6. The black detection distance is the smallest, the white is the largest, the small area objects are small distance and the large area distance is large.Specifications:Mechanical rigidity: FlexibilityNumber of layers: single sideBase material: CopperWorking voltage: 3.8V-5.5VWorking current (5V) : typical current is 6mAObstacle detection time (effective detection range from the non-obstructing target to the presence of an obstacle, or the obstruction to the obstacle course to disappear) : < = 21msDetection range (test environment, room, maximum power, voltage 5v, power consumption 6.5 mA) :White walls: approx. 100cmIBM black computer cover: approx. 20cm/7.87''One finger: approx.18cm/7.08''Palm: approx.30cm/11.81''A transparent original bead pen: approx.20cm/7.87''How it works: The sensor fires infrared light, which is detected by reflected light, and if it detects an obstacle, the OUT foot outputs 0, otherwise 1.Module interface:1. VCC external DC3.8V-5.5V power source (can be directly with 5V single chip).2. GND external DC3.8V-5.5V power supply anode.3. OUT small digital output interface (0 and 1).Package included:1 x Infrared Digital Obstacle Avoidance Sensor Module1 x M2 Screws Set