HKS 80310-AZ001

Pay with

HKS 80310-AZ001 Features

• Model: Mazda RX-7 FD3S 13B-REW 91/12-02/08

• Spring rate: N/mm (kgf/mm): F 157 (16) R 177 (18) Free length (spring type) F 150 (straight wind) R 150 (straight wind)

• Total length adjustment/attenuation force 30 levels/FRONT & REAR: Uitachi

• Detailed vehicle height information is listed in the product description below

• Product conforms to safety standards; however, if too lower, it is not limited to this product. See product description below

About HKS 80310-AZ001

The long-awaited R here! The MAX4SP has been resetted using the latest theory. By adopting new SRF (Super Response Fluid) and LVS (Low Vibration Spring), we have achieved a balance between riding and riding in an unprecedented dimension. Retainer receives a spring load on the front and rear damper to cancel the bending load on the springs, absorb the twist, improving tracking and allowing you to perform LVS (Low Vibration Spring) in any situation. By using new parts inside, there are many changes in the dial, and a wide range of settings are possible. The front and back insulator spring is included to make car height adjustment. The tires used are ADVAN A052 set on the Fuji Speedway course. Recommended dial is 10 front and 5 rear steps. Please use this as a reference when setting up. For those who are mainly concerned about riding on the street, we recommend lowering the rear rate to 35.7 lbs (16 kg/mm). Spring rates can be changed when new but it may not be intended for riding, riding feel, and under-over features, so we recommend that you first use the standard rate or the rear only 2kg/mm down. Experience the evolution of HIPERMAX. Vehicle height information (normal ratio) When shipped: F - 1.1 inches (29 mm), R - 1.4 inches (35 mm), Maximum - Lower Limit: F 0 - 2.7 inches (0 - 68 mm), R - 0 - 2.8 inches (0 - 71 mm) Limit to the lower limit. F 0-68mm R 0--71mm No body or arm interference However, depending on the tire and wheel size.