Battery Water Deionizer Kit

Pay with

Battery Water Deionizer Kit Features

• Easy Installation – Simply attach the bracket to a wall with four bolts. Connect the input hose to your water supply. Install the purity light and insert the probe into the fitting on top of the housing. Mount the display on the back of the mounting bracket.

• Purity Light – Push the test button to monitor the water output and determine when the cartridge needs to be replaced. ”Good” indicates cartridge does not need to be replaced. “Service” indicates cartridge replacement is needed.

• Cartridge Replacement – No tools are needed. To replace the cartridge, turn off supply, unscrew the canister and put the new one in. The old cartridge is non-toxic and can be disposed of easily.

• Comes with an input and output hose. It connects to your choice of direct fill link, manual gun, or an approved competitor filling device.

About Battery Water Deionizer Kit

Dissolved impurities in standard tap water will degrade batteries and decrease battery life and performance. With the BWT deionizer, you can easily and cost effectively filter your water so it isn't tainted with impurities. The deionizer is easy to install. Simply attach the bracket to a wall with four bolts, and connect the input and output hoses. Then insert the probe into the fitting on top of the housing, and mount the display on the back of the unit. The purity light tells you when the cartridge needs to be replaced. Just push the button to see if it is time to replace the cartridge. It connects to your choice of direct fill link, manual gun or an approved competitor filling device (sold separately). If water has particulates or sediment, a pre-filter is recommended. At three grains per gallon of total dissolved solids, our Water Deionizer has 1000 gallons or 3785.4 liters of capacity.