Shockproof Memory Card to IDE, Stable SD Card to IDE Adapter, for XP System Vista System

Pay with

About Shockproof Memory Card To IDE, Stable SD Card To

The memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error. It is a popular mainstream product memory card. This riser card allows you to use the memory card with this superiority to connect to the standard ATA IDE interface as a standard IDE storage device.Features:1. Compliance with standards: Memory card specification Ver2.0, IDE/ATA-33 specification;2. Standard IDE interface: true-IDE mode, and supports DMA-33 transmission mode;3. The IDE interface is a 44-pin/2.0mm male connector;4. There are two main control chips on this board, and there is a memory card socket on the back;5. Advantages: small footprint, compact design and simple operation;6. The memory card can be included with the OS and application software, and the device can be directly activated;7. Support DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / / 2000 / XP / VISTA / OSX / systems.Specification:Colour: BlackIDE interface: 44PINSupport memory card, 8-64GBSupport memory card type: TF, small memory cardSize: Approx. 51 x 41 x 3mm / 2.0 x 1.6 x 0.1inWeight: approx. 9gPackage list:1 x Memory Card to IDE AdapterInstallation Notes:First install the memory card into the slot, then connect the hard drive data cable to the interface of the notebook hard drive. The power-on detection is normal and can be used. It is so simple, no need to make any driver.Notice:For soft routing, the card size is enough within 1G. If you install WIN98, WIN ME, WINXP, or system, the memory card capacity is preferably 2GB or more