All Categories
【Low noise】Noiseless, very stable operation. Electrical safety standard met.
【High Security】The Dental Digital Amalgamato has a security system, when the lid is open, the motor will stop. You do not have to worry about the motor will inadvertently hurt you.
【Intelligent Design】This machine comes with a memory function so you don't have to readjust the model every time, which will save you a lot of time.
【Easy to operate】There is a green switch at the back of the machine. Just turn on the switch, the display will light up, and then the power is on and you are ready to use.
【Adjustable Speed Mode】The machine has two speed modes: "L" is the slow speed mode and "H" high speed mode. Easy for you to
Description This is a machine suitable for mixing silver amalgam powder and mercury in dentistry and obtaining silver amalgam by vibration. It is a silver amalgam machine with low noise, high safety performance, and easy operation. Application The product is suitable for mixing silver alloy powder and mercury in dentistry and obtaining silver amalgam by vibration. Specification Product Name:Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card Notes 1. For the first use, please use high speed idling for 60 seconds, which is favorable to the site adjustment and prolongs service life. 2. This device must be used by specific persons instead of nonprofessional ones. 3. Please keep it in a place where it does not come in contact with water or any other liquid. 4. Please store and use it in a place where there is no air pressure, temperature, humidity, ventilation, sunlight, dust, salt, ions, or other bad air. 5. Please place it in a stable place without any possibility of tilting, shaking, or bumping. 6. Please keep it away from chemicals and chemical gases. 7. Before you run the machine, please use a screwdriver to remove the red set screw under the device in a counterclockwise direction. 8. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.