Zooz 700 Series Z-Wave Plus Double Relay ZEN52 | Control 2 Lights Individually, Signal Repeater | Works with SmartThings, Hubitat, and Home Assistant (JS) | Z-Wave Hub Required (Sold Separately)

Pay with

Zooz 700 Series Z-Wave Plus Double Relay ZEN52 Features

• SMART DOUBLE RELAY: Control 2 loads independently with just one Double Relay. It's perfect for double gang boxes - simply install the relay behind your existing wall switches to make your lights smart. Connect to simple on/off or momentary mechanical switches only, NOT to dimmers or other electronic / smart switches. Z-Wave hub required, scroll down for details.

• 3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way switches as well. Keep your favorite wall control style even if it's a multiway set-up. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.

• EASY INSTALLATION: Pigtail wires for convenient connections. The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

• SMART BULB MODE AND MORE: Bring back the switch function to your old switches even when using smart bulbs. The smart bulb mode allows you to control smart bulbs via Z-Wave without cutting power to them when off. Enjoy the new 700 series Z-Wave with powerful features like SmartStart and S2 authenticated security.

• HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant (Z-Wave JS), and is compatible with SmartThings. This product is backed by US based support from Zooz, 7 days a week and a 5-year warranty once registered.

About Zooz 700 Series Z-Wave Plus Double Relay ZEN52

NOTE: Check Wattage first: DON'T exceed 150 W of LEDs or 500 W incandescent per relay. Use with small fans under 1/4 hp only. NEUTRAL WIRE REQUIRED. SPECIFICATIONS: Model Number: ZEN52 Z-Wave Signal Frequency: 908.42 MHz Power: 110-120 V AC, 60 Hz Maximum Load: 500W incandescent, 150W LED bulbs, 5A resistive, 1/4 HP fan motors per channel (don't use with tube lights or switched receptacles) Z-Wave Range: Up to 300 feet line of sight Dimensions: 1.5" tall, 1.4" wide, 0.7" deep Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only Will it work with my smart speaker Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this device with voice commands. Smart speaker compatible Z-Wave hubs include: compatible with SmartThings Home Assistant (Z-Wave JS) Hubitat