All Categories
These displays are small, only about 1in diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128×64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!This breakout can be used with an I2C interface - selectable by soldering two jumpers on the back. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3.3V or 5V microcontroller or single board computer!Features:Size: 0.96inResolution: 128×64pixelsViewing angle: greater than 160degPower: 0.04W (low-power mode)Input voltage: 3.3V~5VDCWorking temperature: –30~80°CSize: 27mm×27mm×4.1mmDriver IC: SSD1306Communication: I2CBacklight: OLED self-lit (no backlight)Pixel Color: whiteWe have written useful guides for getting you started with these OLED screens:ESP8266: http://learn.acrobotic.com/tutorials/post/esp8266-oled-display-using-i2c