Leviton ODS10-IDT Decora Wall Switch Occupancy Sensor (120/277V rating), Light Almond with Screwless Wallplates, 6-Pack

Pay with

Leviton ODS10-IDT Decora Wall Switch Occupancy Features

• Convenient push-button provides manual on/off light switching at any time

• 180 degrees field-of-view provides approximately 2100 square feet of coverage

• Segmented Fresnel lens provides optimum sensitivity and performance

• 1-Gang decora plus wall plate

• Screwless subplate

• Polycarbonate

About Leviton ODS10-IDT Decora Wall Switch Occupancy

AutoON/AutoOFF PIR Occupancy Sensor (ManualON/AutoOFF selectable) lighting control, Vandal resistant, Manual Wall Switch. Robust Single Latching 10A Relay, No-Neutral wire required, 120/208/220/230/240/277VAC, 50/60hz, Field of View 2100 sq ft (Motion: Major 60'x40'; Minor 40'x20'), Dual Pyrometers for true 180 degree view with Blinders (32 degree block on each side), Adjustable time delay between 30s-30m, Light Sensor (Photocell) included for Ambient Light Hold-Off feature. CEC Title 20/24 Compliant, UL Listed, RoHS Compliant, Light Almond The ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.