Eagles BTS7960 43A High Power Motor Driver, H-Bridge PWM Drive High Power Vehicle Motor Drive Module, Smart Car Driver Module for Arduino Current Limit

Product ID : 58040638

---

  Share   Tweet

share more:

---

Galleon Product ID 58040638

Shipping Weight 0.17 lbs
I think this is wrong?

Model Power-converters 07

Manufacturer Eagles

Shipping Dimension 1.97 x 1.97 x 1.18 inches
I think this is wrong?

See more product information!

-

Save 23%

Before ₱ 1,235

₱ 949

Price Tracker

+ ₱ 150
International Shipping

via AIR

Get it between 2025-07-31 to 2025-08-07. Additional 3 business days for provincial shipping.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

Eagles BTS7960 43A High Power Motor Features

• HIGH POWER - The BTS7960 based driver is a driver for controlling high-power DC motors capable of delivering up to 43A at supply voltages from 6 to 27V

• SPECIFICATION - Maximum current: 43A; supply voltage: 6V-27V; Input level: 3.3V-5V, over-voltage protection value: 30V, over-current protection value: 84A, over-heat protection value: 200℃, rated power: within 200W

• CONTROL METHOD - PWM or level, Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5V), able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output

• UNDERVOLTAGE SHUTDOWN - If the supply voltage drops below 5.4V, the motor driver will shut down and will not start until the supply voltage increases to 5.5V or higher

• OVER TEMPERATURE PROTECTION - The driver adopts a high-power drive H-bridge drive module composed of BTS7960 chips, with thermal over temperature protection function, 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board, voltage indication of motor driver output end; can solder heat sink

About Eagles BTS7960 43A High Power Motor

Eagles BTS7960 43A H Bridge High Power Motor Drive Module Smart Car Driver Module(1 pack) Instruction: This 5v 43a h-bridge motor driver module uses chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A. Electrical performance: Input voltage: 6V-27V Maximum current: 43A Input level: 3.3-5V Control method: PWM or level Duty cycle: 0-100% Over-voltage protection value: 30V Over-current protection value: 84A Overheating protection value: 200°C Rated power: within 200W Pin Description: 1. RPWM: Forward level or PWM signal input, active high 2. LPWM: Reverse level or PWM signal input, active high 3. R_EN: Forward drive enable input, high-level enable, low level off 4. L_EN: Reverse drive enable input, high-level enable, low level off 5. R_IS: Forward drive current alarm output 6. L_IS: Reverse drive current alarm output 7. VCC: +5 V power output, 5V power supply connection with the microcontroller 8. GND: Signal common low end 9. B+: Connect to the positive pole of power supply, 6-27V. 10. B-: Connect to negative pole of power supply. 11. M+: Connect to motor 12. M-: Connect to motor Package Included: 1 * BTS7960 43A High Power Motor Driver Module Note: PWM - Pulse Width Modulation MCU - MicrocontrollerUni ☎ Eagles - Your Professional Tool House