TUNTROL Mechanical Meter 6-40 GPM Aluminum Digital Diesel Fuel Flow Meter Heavy Duty For All Fuel Transfer Pumps (1 1/2")

Pay with

About TUNTROL Mechanical Meter 6-40 GPM Aluminum Digital

Feature: This flow meter is suitable for non-commercial use in diesel, gasoline and kerosene metering. Reliable quality, low price, easy to install and proofread. Features large numbers, easy reading, fast zero return rotation, flexible horizontal or vertical installation. The instrument accuracy can be adjusted, the back screws can be removed, and the precision can be adjusted by adjusting the top wire table inside. Guaranteed for two years warranty. Specification: Flow range: 6-40/GPM Accuracy level: ±1% Nominal diameter (caliber): 1.0 inch Applicable medium: diesel, kerosene, gasoline Product form: mechanical Counting method (number of digits):          Four digits return to zero (0000-999.9L)          Eight-digit accumulation (00000000-99999999) Shell material: aluminum alloy Installation direction: vertical or horizontal Working pressure: 0.04-0.1Mpa Maximum working pressure: 50Psi/3.5Bar Bursting pressure: 400Psi/28Bar Working temperature: -10~50°C Package Content: 1 x Mechanical Fuel Meter Attention The flow rate may be deviated before leaving the factory. Please check the flow meter before using the goods to avoid affecting the measurement reading. The flow meter function will be tested before leaving the factory. The surface of the product may have some oil stains, which will not affect the use. In the process of installing the oil gauge, please pay attention to the tightness of the interface. A gasket or raw tape is required to enhance the tightness The reason why the oil meter does not turn: 1) If used in water, it will rust and get stuck 2) A pre-filter device must be added, a filter needs to be installed before the meter, or foreign objects will jam the turntable.