Radial Engineering Catapult Mini Compact & Durable Passive 4-Ch Cat 5 Analog Audio Snake Receiver (Male XLR Ouputs to Female XLR Inputs) with 7Hz to 20kHz Frequency Response Bundle with Zorro Cloth

Pay with

Radial Engineering Catapult Mini Compact & Durable Features

• The Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable INCLUDED Zorro Instrument Polishing Cloth

• The Mini TX and RX snake receiver can be directly connected using a single Cat 5 cable, providing you with a robust 4-channel analog audio snake that can deliver balanced signals over long distances while maintaining high audio quality. Sends & receive Analog Audio over Cat 5/6 Cable

• Catapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.

• Three versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.

• As many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.

About Radial Engineering Catapult Mini Compact & Durable

Radial Engineering Catapult MINI OverviewThe Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight & economical. Simply connect a shielded Cat 5 cable between any two Catapult modules & they will use the analog conductors in the cable to deliver four balanced audio lines to any destination radial catapult radial catapult mini Radial Catapult RX4 (4 Male XLR Ouputs)The Catapult Mini RX from Radial Engineering acts as a 4-channel audio snake. It features an RJ45 input, which receives four channels of analog audio over Cat 5/6 Ethernet cables. Four male XLR outputs on cable tails allow you to plug directly into inputs of a mixer or recording interface. The housing is made of 16-gauge steel for handling any environment and is powder coated.Radial Catapult TX4 (4 Female XLR Inputs)The Catapult Mini TX from Radial Engineering acts as a 4-channel audio snake receiver. It allows you to send mic or line-level signals from one location to another without signal loss, noise, or interference & without any digital audio conversion needed. The Catapult Mini TX features four female XLR inputs on cable tails & an RJ45 output, which sends analog audio over cat 5/6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.Catapult MINI Key FeaturesSend four channels of analog audio over a Cat 5/6 cableAvailable with XLRM, XLRF or ¼” TRS connectorsWorks with a building’s existing cable infrastructureCompact & lightweight, yet durable and ruggedEconomical Cat 5/6 cable replaces bulky multi channel audio snakes