Everpert 12V Racing Car 50-150 Degree Oil Temp Gauge Meter with Sensor+ 64 Adjustable Backlight Colors

Pay with

About Everpert 12V Racing Car 50-150 Degree Oil Temp

Wiring harness connection instructions: Red line: connect to the positive pole of power supply (+12V) Orange line: ING (when the ignition switch is on, connect to 12V) White line: ILM line, backlight (+12V) Black line: ground (connect to the negative pole of power supply) Bracket installation instructions: 1. Open the package and take out the double-sided tape and stick it on the bottom of the bracket. 2. Insert the protruding part of the bracket into the meter cup and connect the bracket to the meter cup using the bolts, nuts and washers included in the kit; 3. Attach 1~2 double-sided tapes to the aluminum shell and connect them as buffers on the meter; 4. Pass the instrument wires through the meter cup holes and connect them to the meter; 5. Place the meter in the meter cup to ensure that the wire is not caught in the middle; 6. Attach double-sided tapes to the back of the bracket and bend the bracket to fit the position you want to install. Specifications: Shell material: plastic Shell color: black Front diameter: 70mm/2.76"" Back diameter: 65mm/2.56"" Thickness: 66mm/2.60"" Working voltage: 10V-16V (12V vehicles only) Measuring range: 50-150℃ Gauge storage temperature: -30C (-22F) ~ +80C (176F) Gauge working temperature: -30C (-22F) ~ +60C (140F) Sensor storage temperature: -30C (-22F) ~ +150C (302F) Sensor working temperature: -30C (-22) ~ +150C (302F) Working current: Maximum value when connecting a meter Red line: 200A (when the ignition switch is closed), 0.2mA (when the ignition switch is turned off) White line: 0.5mAPackage included:1 X Car Gauge 1 X Shell 1 X Front Cover 1 X Sensor 1 X Bracket 1 X Bolt and Nut 1 X Double-Sided Tape 2 X Power Cords 1 X Manual