VERIMP Double Slit Interference Single Slit Diffraction Experimental Instrument Observer Double Slit Perturbation Single Dry Diffraction Experiment Instrument Experimental

Pay with

VERIMP Double Slit Interference Single Slit Features

• [Use]: Observe the interference pattern and diffraction pattern produced by white light and monochromatic light passing through double slits/single slits

• [Easy operation]: The structure is simple and reasonable, the performance is stable, and the interference fringes are clear. The operation is also very simple, you can experiment directly in an ordinary classroom.

• [Structure]: It is composed of bulb, color filter, single slit, double slit seat, reticle, eyepiece, shading tube, and base.

• [principle]:Two very close parallel slits can divide the light emitted by a line light source into two coherent light waves. When these two coherent light waves meet in space. There will be mutual strengthening or mutual weakening.

• [service]:We attach great importance to customer experience, so you can contact us if you have any questions, and we will get back to you within 24 hours!

About VERIMP Double Slit Interference Single Slit

Product name: Double-slit interference single-slit diffraction observer Product size: 38.5*25.5*5*17cm(15.15*10.04*1.97*6.69in) Product weight: 885g Installation: 1. Install the support rod on the disc seat, tighten it with a wing nut. Insert the small plunger of the shading tube into the support rod hole 2. Install a double slit and seat on one end of the shading tube, and a single slit tube, and install a measurement and observation system on the other end. Note: 1. All parts of this instrument have been strictly adjusted and inspected before leaving the factory, do not disassemble them casually. 2. If there is dust and stains on the color filter, double slit and single slit, wipe it gently with lens cleaning paper or a clean soft cloth. 3. If the pressing screws on the color filter, single seam and double seams are loose, they can be tightened, but do not tighten them too tightly to avoid crushing the glass sheet. 4. Double-slit seat. When the measurement and observation system is installed on the shading tube, it must be installed to the end, that is, the positioning ladder is in close contact, otherwise it will become larger and affect the experimental effect. 5 The instrument should be stored in the instrument case when not in use and stored in a dry and ventilated place.