HANGKAI Outboard Motor,12 HP 2-Stroke Outboard Motor Engine Fishing Boat Motor Air Cooling System Durable Cast Aluminum Construction for Superior Corrosion Protection

Pay with

About HANGKAI Outboard Motor,12 HP 2-Stroke Outboard

Must Read Before Using! Two stroke 12 hp: Firstly, Fill the gear oil (open gear box lid and fill it). Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times. Thirdly, Fill engine oil don't exceed the head of the pattern. Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%. Then, Rapidly pull the starter line. After the motor start, please turn the throttle to running state. Then, it can be operated now. Don't do the following will avoid cylinder Scoring: 1.Start the motor in the water 2.Use the motor when it stop cyling water Even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked. Specifications: Displacement: 246CC Gear ratio: 2.08(27:13) Cylinder: 2 Max.speed(r/min): 4500-5500 Gear Positions: F-N-R Packing size: 120*70.5*37.5cm/47.24*27.76*14.76in Ignition System: CDI Cooling System: Water-cooling Control System: Tiller control Starting System: Manual start Control System: #93 gasoline N.W./G.W.: 26kg(57.32lb)/33kg(72.75lb) Bore x Stroke(mm): 50x43 Recommended Propeller range: 3-8.9"x8.5” Recommended Lubricant: 2 Stroke Lubricating oil Mixing ratio: Fuel:oil=50:1 Trim and tilt system: Manual Tilt Overall LxWxH: 793*320*996cm/31.22*12.60*39.21in Standard fuel tank capacity: 12L Paking list: Outboard,instruction manual, flameout rope, oil pipe, 24 liter fuel tank, tool kit, split pin, spark plug, water pump impeller, starting rope, paper pad