Apark Digital Car HUD Head Up Display 3.5 with OBD2/EUOBD Interface Plug & Play Vehicle Speed KM/h MPH, OverSpeed Warning, Water Temperature, Battery Voltage, Mileage Measurement

Pay with

About Apark Digital Car HUD Head Up Display 3.5 With

Apark Car HUD Head Up Display 3.5 with OBD2/EUOBD Interface Plug How To Installation Several car brand or model with cover in OBD interface, it may not close the cover after connect the HUD plug.For this,you can push the snap of OBD interface in. Then you can connect the HUD plug inside and you can close the cover now,fixed the interfaces in certain position. 1.Find the car's 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket. 2.Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle. 3.The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film. OBD2 devices are NOT compatible with: 1. European / American cars manufacture before 2004 and Asian cars manufactured before 2008. 2. American cars manufacture Dodge, jeep,Chrysler, Chevrolet and all cars before 2004. 3. All France and Italy cars. 4. Japanese cars manufacture SUZUKI, Subaru, MAZDA (MAZDA 6), Infiniti (QX50 q50 q501，QX60), Lexus (is250/ex250/ES300H),Toyota (HIACE/RAV4 ) Honda (jazz/CRV)and all cars before 2008. 5. Germany cars manufacture Volkswagen (Santana3000). 6. Korean cars manufacture KIA, Hyundai some models. 7. Oil and electricity mixing, diesel powered car, Pickup, SUV, ORV. Technical Parameters: Environment temperature: -40c- + 80c atmospheric pressure 86-106KPa Relative Humidity: 10% -95% environmental noise less than 60dB (A) Alarm sound level: More than 30dB (A) Working voltage: 9V ~ 16Vdc (12Vdc / 400mA) HUD size: 9*5.4*1.2(cm) HUD Weight: 40 g What you get: 1 * HUD Interface + 1 * OBDII Cable + 1 * Reflection Film + 1 * Manual + 1 * Non-Slip Mat