Nano Energizer - Engine Oil Additive / 100% Restore Fuel Consumption

Pay with

About Nano Energizer - Engine Oil Additive / 100% Restore

Nano Energizer AIO - Engine Restoration Additives For All Motor Vehicles & Bikes Above 600cc Long Lasting Up To 30000km Suitable For Use In All Motor Vehicles Running On All Types Of Engine Oils Including Tractors, Powerboats, Heavy Machineries, 600cc & Above Bikes Etc PLEASE POUR THE PRODUCT INTO THE ENGINE OIL FILLER PORT Steps For Using Nano Energizer : 1. SHAKE HARD & PRESS the pack of Nano Energizer for least 2 to 4 minutes. Make sure there is no harden substance. 2. Warm up the engine for about 1 to 2 minutes before application. 3. Pour the Nano Energizer into the ENGINE OIL FILLER PORT. 4. Start the engine and let it idle OR drive for 5 to 10 minutes to let the Nano Energizer mix with the engine oil. 5. Warm up the engine / drive the vehicle everyday for at least a week for at least 5 minutes (for drivers who seldom drive). We DO NOT recommend to use the Nano Energizer on the following: 1) If vehicle is due for servicing within 5000km. 2) If ENGINE FLUSH was not done for the last few oil change (the oil sludge will dampen the effects of the Nano Energizer). The best effects can be seen if applied the Nano Energizer after ENGINE FLUSH (wait a week before application) and OIL CHANGE. For low mileage/new vehicles (min. 3000km mileage), Nano Energizer will not have much visible effects but it will form a protective layer inside the engine, protecting the engine interior. 1 pack of Nano Energizer to be used for 600cc to 1999cc engines. 2 packs of NanoE Energizer is recommended for engines above 2000cc / turbo / diesel vehicles & vehicles with 150000km & above mileage.