Electric Pipe Threader Kit 2300W Portable Pipe Threading Machine Handheld Ratchet Pipe Threading Tool Set with 6 Dies Set 1/2" to 2" & Pipe Clamp for Galvanized Pipe, Iron Pipe, PP Pipe

Pay with

Electric Pipe Threader Kit 2300W Portable Pipe Features

• 【Wide Applications】- VONZOER Electric pipe threading machine is an ideal tool to make new threads or repair damaged pipe threads, it is widely used for threading galvanized pipes, iron pipes, pp pipes, and tubes. It is suitable for various standard water, electric, or gas pipes from 20.9mm(0.82in) to 49.6mm(1.95in).

• 【Superior Performance】- This handheld pipe threader is made of premium metal and plastic, which are high strength and durable. Powered by 2300W high power all copper wire motor and the rated spindle speed is 25rpm, high efficiency and low noise, multiple heat dissipation holes to ensure timely heat dissipation of the machine.

• 【6 Dies Head Set】- Equipped with 6 different sizes of die heads: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2". The molds are replaceable to meet your different needs. The chip removal holes on each die head can effectively avoid clogging and ensure the smooth operation of the work.

• 【User-friendly Design】- Tube Holder: You can fix the tube on the tube holder, it can help you with the pipes more conveniently; Fixed Rod: The fixed rod can help you fix the pipe and make the pipe attached to each other as you want.

• 【Easy to Store & Carry】- Equipped with a suitcase, with a handle, a large capacity, buckles and grooves helps you store accessories orderly, compact size, easy to storage and carry.

• 【Operation Note】- 1. Do not directly change the direction of the machine during rotation; 2. Lubricating oil should be added during use; 3. The pipe must be fixed firmly and cannot rotate with the machine; 4. If there is abnormal heating or smoke, power off in time and continue to use after cooling.

About Electric Pipe Threader Kit 2300W Portable Pipe

Applications This machine is suitable for threading galvanized pipes, iron pipes, pp pipes, and tubes. It is suitable for threading various water, electric, or gas pipes from 20.9mm(0.82in) to 49.6mm(1.95in). How to Use 1.You should select the corresponding die head. The blade is installed from the right on the host. 2. Clamp the tube to approximately the same length as the arm (L2 is approximately equal to L1). 3. Turn the front and rear switches to the down arrow position to start the switch and auxiliary contacts. 4. For hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in time, plastic pipes without fuel. 5. Note that the tube holder can not be touched with the host during the right shift, otherwise it will hurt the host. 6. After the machine stopped, pull up the reverse switch and exit the tube. 7. This product supports the use of standard tubes. Specifications Threading Range: 20.9-49.6mm (0.8-2in) Material: All Copper Wire Machine Power Type: Alternating Current Rated Power: 2300W Voltage: 110V, 50HZ Rated Spindle Speed: 25 R/Min Size: 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 (Inch) Outer Pipe Diameter: 22, 27, 34, 42, 48, 60mm Inner Pipe Diameter: 15, 20, 25, 32, 40, 50mm Product Dimensions: 57x14x31cm (22.4x5.5x12.2in) Weight: 15.4kg (33.9lb) Package Includes 1x Pipe Threader 1x Pipe Clamp 1x Fixed Rod 2x Carbon Brush 1x Oil Can 6x Dies 1x Storage Box Operation Note 1.Do not directly change the direction of the machine during rotation 2.Lubricating oil should be added during use 3. The pipe must be fixed firmly and cannot rotate with the machine 4. If there is abnormal heating or smoke, power off in time and continue to use after cooling.