All Categories
Get it between 2024-05-17 to 2024-05-24. Additional 3 business days for provincial shipping.
【90W PoE++ Injector】Up to 90W Gigabit PoE++ Injector, with one Ethernet Input (data only) port and one Output (data + power) port. PSE90G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones, safe and reliable power to WLAN access points.
【Complies with IEEE 802.3bt】It complies with IEEE 802.3bt PoE standard, supports 10/100/1000Base-T LAN environment. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points.
【Auto-Sensing Technology】This POE Injector can detect both POE and non-POE devices. It will communicate with the device and provide an appropriate power source, for non-standard POE equipment, it will automatically detect and actively shut down to protect the equipment. And Safe on Low Power Devices Receive Only the Power They Need.
【Plug and Play without Setting】Only need to connect a PoE network device, which is suitable for most installation scenarios. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. Unique interlock function, easy to install.
【Multiple Protections】Overcurrent protection, overcharge protection, overvoltage protection and anti-interference protection.
OVERVIEW: The PSE90G is a Gigabit Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The PSE90G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3bt PoE standard. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in PSE90G, people can get the benefit of flexible network installation at lower cost, less downtime. Model: PSE90G Technical Specifications Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-Tx Fast Ethernet IEEE 802.3af/at/bt Power over Ethernet Connector: RJ-45 10/100/1000 Mbps Pin Assignment and Polarity: 1/2 (+), 3/6 (-);4/5 (+), 7/8 (-) Output Power Voltage: 54-56 VDC Power: Mode-A+Mode-B 90 Watts Max. Input Power AC Input Voltage: 100~240VAC Requirements AC Input Current: ≤1.5A @ 100~240 VAC Indicators AC Power (Green) PoE (Orange) Environmental Conditions Operating Temperature: -20 ~55°C Storage Temperature: -25 ~ 70°C Storage Humidity: Maximum 95%, Non-condensing Dimensions (L x W x H): 144mm x 57mm x 40mm (5.62in x 2.24in x 1.57in) Weight: 350g (0.77lbs) Package Content: 1 x 90W POE Injector 1 x Power Cable 1 x Quick Installation Guid