We specialize in hard to find items
All Categories
Pro Tapes Cable-Path Cable Path Tape: 4 in. x 30 yds. (Yellow with Light Black "CABLE-PATH" printing)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Pro Tapes Cable-Path Cable Path Tape: 4 In. X 30
Pro Tapes Cable-Path Tape is a zone-coated gaffers tape. This unique product is designed to make the advancement of cable a breeze. Pro Tapes Cable Path Tape is a premium vinyl coated cloth tape that is coated on both edges with a premium cured rubber adhesive system. The center portion has a smooth surface for pulling cable and wire through easily without binding (approximately 2-1/2 inches on the 4 inch tape and 3-1/2 inches on the 6 inch tape). The high performance adhesive will hold firmly for extended periods of time on most surfaces and removes without residue. Matte gaffer backing for low reflectivity of light and the backing is hand tearable. If you do not need to freely move the cable and wire after the tape has been applied Pro Tapes Striped Pro-Gaff is another option to look at if you just want to ensure higher visibility and safety for areas with cabling. Made in the U.S. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 27m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information• Core: 3 inch diameter • Backing/Carrier: vinyl coated cloth • Adhesive: cured rubber • Thickness: 12.5 mils (carrier, adhesive) • Adhesion: 95 ounces per inch (to stainless steel test panel) • Tensile Strength: 45 pounds per inch (longitudinal)
