All Categories
Professional Protective Functions l. Overload protection: when overloading l25%, the inverter will send alarm and stop working for 20 seconds. Once the connected device back to normal range, the inverter will resume working 2. Short circuit protection The power inverter will auto shut off if any short circuit 3. Over-temperature protection when the inside temperature of the inverter is 80℃, the RED indication light will be on. The inverter will stop working, once the temperature drops to accepted level, the inverter will automatically resume working. 4. Low voltage protectionwhen the battery voltage is below the setting level, the inverter will send alarm by beeping. When the battery voltage keeps dropping to its shutting level, the inverter will beep, and the RED LED will lit, the inverter will stop working, when the battery voltage is increased to its restart level, inverter will automatically resume working. 5. Over voltage protectionwhen the input voltage is higher than the setting level, the inverter will stop working, when the input voltage is normal, it will automatically resume working. 6. Reverse connection protectiononce there is reverse connection, the Inverter fuse will be burnt. In this case, please switch off the inverter, disconnect the power source, change the fuse. REVERSE CONNECT IS STRICTLY PROHIBITED