Metabo Paint Remover Tool | 10,000 RPM | 6.0 AMP | 3-1/8-Inch Adjustable Depth Cutting Blade | Dust Port w/metaBOX | LF 724S MB

Pay with

Metabo Paint Remover Tool | 10,000 RPM | 6.0 AMP Features

• For the removal of paint and varnish from even wooden surfaces, such as stairs, doors and windows

• Up to 70 -Percent time saving compared to conventional working methods

• 4 reversible carbide blades with high tool life

• Cutting edge cycle 3-1/8-Inch- Maximum notch depth unlimited - Lateral milling height 1-1/8-Inch - Axial molding/routing depth 0-Inch

• For working on a roof truss for edges and corners difficult to reach.Output power:430 W

About Metabo Paint Remover Tool | 10,000 RPM | 6.0 AMP

The LF724 is a paint remover that strips paint, varnish and other coatings on flat wood surfaces up to 70-Percent faster than other methods. The LF724 paint remover, which is also suitable for use on untreated wood, provides a more environmentally sound solution for coating removal than other methods such as heat gun with putty knife and chemical stripping. The LfF724 paint remover features Metabos exclusive S-automatic clutch, which increases the life of the tool by reducing damage to the gear train when the planer hits a nail on siding or wood. The efficient design incorporates the same winding protection grid featured on other Metabo tools, reducing the overall cost to the customer. The tool has four reversible solid tungsten carbide blades for long service life, while a low vibration level reduces user fatigue. It creates minimal dust during use and is highly suitable for handling rabbets. Blade cutting diameter is 3-1/7-Inch and the maximum rabbeting height is 1-1/0-Inch. Cutting depths are 0.012-Inch , axil and .006-Inch , radial. No-load speed for the Lf724 is 11,000 rpm, torque is 18-Inch-Pound, and total tool weight is 6.25-Pound The remover comes standard with the four carbon blades, a vacuum adapter, a combination wrench, and a carrying case.