Kreg Circular Saw Cutting Kit - Rip-Cut™ & Accu-Cut™ Bundle - KMA2685, KMA2700

Pay with

Kreg Circular Saw Cutting Kit Features

• You'll never struggle to rip down plywood again with this best-selling bundle!

• Rip, crosscut, and make angled cuts up to 50" long in plywood, MDF, and panels with the Accu-Cut

• Make rip cuts and crosscuts up to 24" wide with the Rip-Cut

• Mount almost any circular saw — left- or right-blade — to the Universal Sled

• Take your saw to the material instead of having to take your material to the saw

About Kreg Circular Saw Cutting Kit

Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide. The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut circular saw guide, you can cut with the confidence you want and the precision you need. The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. All you have to do is lock the saw in at the measurement you want — up to 24" — using the built-in measuring scale, and then make your cut. With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself. Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control. The Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don't have a straight, flat edge.