LiNKFOR 192kHz DAC Digital to Analog Audio Converter with Headphone Amplifier Function Volume Control Digital Optical Coaxial Toslink to Analog Stereo L/R 3.5mm Audio Adapter for PS4 Apple TV DVD PS3

Pay with

LiNKFOR 192kHz DAC Digital to Analog Audio Features

• 【192kHz Digital to Analog Audio Converter】Digital to Analog Audio Converter, Converts Digital Coaxial Toslink Optical to Analog Stereo L/R RCA 3.5mm Audio Adapter ( NOTE: not capable of being reversed ,It is Incompatible with 5.1 Channel Signal Such as Dolby AC3, DTS, Please Set the output Audio mode of the device to PCM or LPCM before Using)

• 【Headphone Amplifier Function】Amplify the front-end 3.5mm headphone output audio signal, perfect compatible with gaming headphones.

• 【With Volume Adjustment Control and Power Switch】 There are Professional Audio Amplifier Chip and Volume Adjusting Switch. Allowing You to Drive Your Headphone Directly and Adjust the Output Volume.and You Could close the converter by turn down the Volume control no need the put off the power adapter

• 【Optical Coaxial Switcher】 The design of coaxial and optical toggle switch enables this decoder to connect multiple devices Simultaneously.No need to replace the cable conversion input source

• 【192kHz 24-bit High Quality Sampling Rate】 Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz and 192 KHz; 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels, And the Noise can be Eliminated When No Signal is Input, and Automatically Mute While Non-audio Signal is Input

About LiNKFOR 192kHz DAC Digital To Analog Audio

Introduction： This converter is designed for professional audio signal processing.It can easily convert Coaxial or Toslink interface to RCA analog audio interface and 3.5mm headphone jack. Professional audio amplifier chip and volume adjusting switch are designed for driving your headphone directly and adjusting the output volume.  Specification: Support Audio Format: PCM Signal-to-Noise Ratio: 105DB Separating Degree (1KHZ): 94DB Response Frequency: 20Hz~20KHz -0.2db THD+N: -90DB Total Harmonic Distortion (THD): 10Hz~20KHz 0.25-0.065% Blocking Time: 0.577Fs Sampling Rate: 32~192 kHz Bit Rate: 16~24 Bit Input Electrical Level: ±0.3V Output Electrical Level: 3V Maximum Output Power: 0.3W Earphone Output Power: 0-250mW Output Impedance: 10 ohms Working Voltage: +5V Maximum Power Consumption: 100mA Operating Temperature Range: -10-70℃ Storage Temperature Range: -60-150℃ Operating Humidity Range: 10% - 80%RH（No Condensation） Storage Humidity Range: 5- 90%RH（No Condensation） Case Dimension: 3.4" x 2.7" x 1.2" Weight: 118g Product Shell: Metel Case Please NOTE: 1. Set TV Audio Output to the PCM/LPCM Format.  2. This converter doesn't Support 5.1 Channel Such As Dolby and DTS.  3. Please use the 5V1A power adapter as power supply.  Package Content: 1 x Digital to Analog Audio Converter 1 x 1.5m Toslink Cable (Optical Cable) 1 x 1.5m Coaxial Cable 1 x Power Adaptor 1 x USB Cable 1 x User Manual