Plug and Drive EcoOBD2 Gasoline Car Fuel Saving Device Best Tool Save 15% Fuel

Pay with

About Plug And Drive EcoOBD2 Gasoline Car Fuel Saving

NitroOBD2 Chip Tuning Box is very easy to use, how? Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. EcoOBD2 settings are optimal and the best for your car.Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment.EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then EcoOBD2 adjusts itself to match your car perfectly.EcoOBD2 works on the basis of changing the signal form ECU. NitroOBD2 Chip Tuning Box Installation and Calibration steps: 1 - Pull the Car Key out from the ignition. 2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2.3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)5 - Start up the engine. Where located OBD2 connector in your car?1 Driver's side, underneath dashboard, in the area under the steering column,2 Driver's side, underneath dashboard, between the driver-side door and steering column area3 Driver's side, underneath dashboard, between the steering column area and the center console4 Driver's side, dashboard instrument/gauge area, between the steering column and center console5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column6 Center console, vertical surface left of vehicle centerline7 Center console, vertical surface right of vehicle centerline or on passenger side of center console8 Center console, horizontal surface in front passenger area. Package Included:1 x EcoOBD2 Chip Tuning Box Interface1 x User Manuel English